Quick answer: Kada prasad uses equal amounts of atta, ghee and sugar. The part recipes disagree on is the water: Chef Kunal Kapur and The Belly Rules The Mind use 2 cups per cup of atta, while FunFoodFrolic prints 4 cups. Start with 2 cups for a firmer, gurdwara-like halwa and add hot water only if it looks tight. Roast the atta on low heat until it smells nutty and turns light brown, then add the hot liquid slowly while you stir.
Key takeaways
- Guru Nanak Jayanti (Gurpurab) falls on Tuesday, 24 November 2026, according to Drik Panchang’s New Delhi listing.
- The base ratio is 1 cup atta, 1 cup ghee and 1 cup sugar in all three recipes we read.
- Water ranges from 2 to 4 cups per cup of atta, which is why one batch comes out firm and another runny.
- Lumps come from adding cold or all-at-once liquid. Add hot syrup or water in stages and keep stirring.
In this article, you’ll learn:
- When Gurpurab is this year
- The kada prasad ratio, and how much water to use
- How to roast the atta without burning it
- Two ways to add the sugar
- How to fix lumpy, runny or greasy halwa
- How to store and reheat leftovers
When Is Gurpurab in 2026?
Drik Panchang lists Guru Nanak Jayanti on Tuesday, 24 November 2026, for New Delhi. It’s the 557th birth anniversary of Guru Nanak. Purnima tithi begins at 11:42 PM on 23 November and ends at 8:23 PM on 24 November.
That gives you a week. If you’re making kada prasad at home for the morning, or to take to the gurdwara, it helps to try a small batch this weekend. The recipe has just four ingredients, but the roast and the water both change the result a lot.
The Kada Prasad Ratio: 1:1:1, Then Water
Every recipe we read agrees on the first part. You use the same amount of whole wheat atta, ghee and sugar. The water is where they split.
| Recipe | Atta | Ghee | Sugar | Water | Sugar goes in as |
|---|---|---|---|---|---|
| Chef Kunal Kapur | 1 cup | 1 cup | 1 cup | 2 cups | Syrup (boiled, not reduced) |
| The Belly Rules The Mind | 1 cup, coarse | 1 cup | 1 cup | 2 cups | Dry sugar, then water |
| FunFoodFrolic | 1 cup | 1 cup | 1 cup | 4 cups | Warm syrup |
Kunal Kapur’s version serves 4 and takes about 20 minutes in total. The Belly Rules The Mind says its batch makes about 10 servings, which suits prasad, where everyone gets a small portion.
So which water amount should you pick? Two cups is the more common choice and gives a halwa that holds together on a spoon. Four cups gives a softer, looser result and takes longer to cook down. We’d start with 2 cups and keep a little hot water ready on the side.
How to Roast the Atta for Kada Prasad
The roast decides the colour and the flavour. Rush it, and the halwa tastes of raw flour.
- Melt the ghee in a heavy kadhai on medium heat. The Belly Rules The Mind says it should shimmer but not smoke.
- Add the atta and turn the heat down. Stir constantly.
- Watch the colour. It goes from white to pale blond, then to light brown, and the smell turns nutty.
- Stop at a biscuit-brown shade. Darker is fine for some families, but burnt atta turns bitter and you can’t fix that.
How long does this take? The recipes differ. The Belly Rules The Mind breaks it into 3 to 5 minutes for pale blond, then 3 to 5 more for light brown. FunFoodFrolic says about 10 to 15 minutes on low heat. Kunal Kapur gives no time and says to go by the golden brown colour. In short, your stove and pan set the time, so cook by colour and smell.
A heavy kadhai helps here. Thin pans heat unevenly and the atta catches at the centre before the edges colour.
Two Ways to Add the Sugar
Syrup method. Kunal Kapur and FunFoodFrolic boil the sugar with the water first. Kunal Kapur says the aim is only to dissolve the sugar, not to thicken it. FunFoodFrolic keeps the syrup warm on low heat while the atta roasts. When the atta is ready, the hot syrup goes in.
Dry sugar method. The Belly Rules The Mind adds dry sugar to the roasted atta, stirs for about a minute, then pours in the water.
Both work. The syrup method is a little more forgiving, because the sugar is already dissolved and you’re less likely to end up with a grainy texture.
Whichever you choose, be careful. Hot liquid hitting hot ghee splutters hard. Stand back, pour slowly, and use a long ladle.
Why Kada Prasad Turns Lumpy, and the Fix
Here are the common problems and what to do about each.
| Problem | Likely cause | Fix |
|---|---|---|
| Lumps | Liquid added cold or all at once | Use hot syrup or water, add in stages, stir in one direction |
| Raw flour taste | Atta not roasted long enough | Roast until nutty and light brown before adding liquid |
| Bitter, dark halwa | Heat too high during the roast | Low heat, constant stirring, heavy pan |
| Runny | Too much water, or stopped too soon | Keep cooking on low until it gathers into one mass |
| Too stiff | Too little water | Add a few spoons of hot water and stir through |
| Greasy pool on top | Normal at the end | Ghee separating is the sign it’s done |
FunFoodFrolic recommends stirring in one circular direction to prevent lumps. The Belly Rules The Mind says the halwa is ready when it pulls away from the sides in one mass and the ghee releases at the edges. Kunal Kapur uses the same cue: cook until the ghee oozes out at the sides.
Can You Use Less Ghee?
You can, but it won’t taste the same. FunFoodFrolic is firm about this and says to avoid reducing the ghee. It’s the fat that roasts the atta evenly and gives kada prasad its glossy, soft texture.
If you want a lighter sweet for regular days, pick a different recipe rather than cutting this one. Our moong dal halwa cooker method explains how far ghee can drop before a halwa turns dense, and the same idea applies here. For prasad, most families keep the traditional ratio and serve small portions.
The gurdwara version is usually plain. Home cooks often add cardamom, and FunFoodFrolic puts it in the syrup. Almonds are optional.
Making Kada Prasad for a Crowd
The 1:1:1 ratio makes scaling easy. Double everything, including the water. A few things change with bigger batches:
- Roasting takes longer, so keep the heat low and be patient.
- Use a wide, heavy kadhai so the atta spreads in a thin layer.
- Add the liquid in three or four parts, not two.
- Set aside the portion for the offering first, as The Belly Rules The Mind suggests, then serve the rest.
Storing and Reheating Kada Prasad
Kada prasad tastes best warm. The Belly Rules The Mind says it stays good at room temperature for several hours. FunFoodFrolic suggests an airtight box in the fridge for leftovers and warming them in the microwave for 1 to 2 minutes.
For leftovers, follow basic chilling rules. UK Food Standards Agency guidance says to get cooked food into the fridge within one to two hours, keep the fridge between 0 and 5°C, and eat leftovers within 48 hours. The ghee sets in the fridge, so add a spoon of hot water when you reheat and stir until it softens.
Frequently Asked Questions About Kada Prasad
Is kada prasad the same as aate ka halwa?
Close. FunFoodFrolic treats them as one dish and uses the same equal atta, ghee and sugar. The gurdwara version is usually plain, while home versions often add cardamom or almonds.
Which atta is best for kada prasad?
Regular whole wheat atta works. The Belly Rules The Mind uses coarse atta, which gives a slightly grainy bite.
Can I use jaggery instead of sugar?
The three recipes we read all use white sugar, and none of them tests jaggery. Jaggery would change the colour and taste, so for prasad it’s safest to stick to sugar.
How do I know when kada prasad is done?
It gathers into one soft mass, pulls away from the sides, and ghee shows at the edges. If it’s still loose, keep stirring on low heat.
A Week to Practise Before Gurpurab
Kada prasad is four ingredients and about 20 minutes, but the roast colour and the water decide how it turns out. Try a half batch this weekend with 2 cups of water per cup of atta, note how your stove behaves, and you’ll know exactly what to do on 24 November.
Save this for Gurpurab morning, share it with whoever makes the prasad at home, and follow our WhatsApp channel for more festival recipes.